Trouble Shooting; Cleaning And Care - Candy CMCH 154 EL88 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

TROUBLE SHOOTING

Cleaning and Care

about three hours.
1.
There is a water conduit at the bottom of the freezer, when defrosting, extract the rubber
cover, defrosted water will drip into the hole and flow out. (NOTES: Please keep the rubber
cover well during the defrosting and put it back after defrosting is done).
2.
Extract the water conduit by 20-25mm until the water hole can be seen.
3.
Twist the water conduit until the arrow points downward.
4.
After defrosting is done, make sure there is no more water coming out before out the water
conduit in place and make the arrow point upward.
We recommend that you switch off the freezer at the socket outlet and pull out the mains plug
before cleaning.
Never use any sharp abrasive instrument, soap, household cleaner, detergent and wax polish for
cleaning.
Use lukewarm water to clean the cabinet of the freezer and wipe it dry.
Use a damp cloth wrung out in a solution of one teaspoon of bicarbonate of soda to one pint of
water to clean the interior and wipe it dry.
Excess deposit of ice should be removed on a regular basis using a plastic ice scraper available from
your local store. Large accumulation of ice will impair the performance of the freezer.
If the freezer is not going to be used for a long period of time switch it off, remove all food, clean it
and leave the lid ajar.
Check lid seals regularly to ensure they are clean and free from food particles.
If the appliance does not operate when switched on, check.
The product is designed and built for domestic household use only.
The plug is inserted properly in the socket and that the power supply is on. (To check the
power supply to the socket, plug in another appliance).
The fuse has blown/circuit breaker has tripped/main distribution switch has been turned
off.
The temperature control has been set correctly.
If the provided plug has been replaced, make sure the new plug is properly connected. If
the appliance is still not operating after the above checks, please contact Customer
Service.
32

Publicité

Table des Matières
loading

Table des Matières