Moving And Storage - Bremshey TREADLINE CONTROL Mode D'emploi

Power cord
NOTE! DON'T PUSH IN THE SAFETY SWITCH BEFORE
UNPLUGGING THE MACHINE'S POWER CORD.
If you leave the treadmill plugged in after turning
off the console, there will still be current running to
the console. This treadmill is equipped with a safety
control program that will automatically shut down
the machine after six hours of no use. In the event of
an automatic shut down, please follow the procedure
below to restart the treadmill:
Unplug the power cord form the machine's socket.
A.
Replug the power cord into the machine's socket to
restart the machine.

MOVING AND STORAGE

After assembly is complete, you may fold the
machine into the upright position for storage. To hold
the machine, raise the desk until it locks in to position.
Make sure you hear the click sound of the deck
NOTE!
locking into position. This is to ensure the deck is
locked in place and will not drop back down.
Make sure the treadmill's incline is at 0 before
NOTE!
folding the deck. If the incline is not at 0, folding will
damage the mechanism.
Safety switch
First push the frame toward the console, then step on
the pedal. Now you can lower the deck to the floor.
NOTE!
feature to help the deck lower slowly. Please make
sure there are no children or other things under the
deck when you lower it.
TO MOVE THE TREADMILL
Before moving the CONTROL, be sure the power
cord is unplugged from the wall and the treadmill.
Fold up the running deck until it is locked and push
the equipment on the transportation wheels. Lower the
treadmill carefully onto the floor. Hold the handlebar
to move forward the treadmill.
NOTE!
over uneven surfaces, for example over a step. The
treadmill should never be transported upstairs using
the wheels over the steps, instead it must be carried.
We recommend that you use a protective base when
transporting the equipment.
NOTE!
centered after moving.
O W N E R ' S M A N U A L • C O N T R O L
This machine has a built-in safety unfolding
Transport the treadmill with extreme caution
The running belt needs to be realigned and
G B
9