Hansgrohe Metris S06401 Série Instructions De Montage page 6

1
1
2
3
6

3 mm
English
Install the ThermoBalance
deck valve
(1) Install the lower mounting ring and washer.
Screw the lower mounting ring to its lowest
position.
() Insert the rough up through the mounting
surface.
Install the upper mounting ring. Tighten it as
far as it will go without forcing it. It will stop at
the correct mounting height.
Rest the rough on the mounting surface.
Tighten the lower mounting ring.
Tighten the tensioning screws using a 3mm
Allen wrench.
Install the plaster shield.