tomado TFS4006B Mode D'emploi page 13

Before using the fan for the first time, please proceed as follows: carefully unpack the appliance and all components
and remove all packaging material and any promotional stickers.
Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Assemble the fan in accordance with the instructions.
1. Remove the fixing bolt and rings for the base from the bottom of the pedestal - fig. 1.
2. Grab the foot and place the pedestal in the recess of the foot. While holding these parts, turn everything around,
allowing you to place the rings and then the fixing bolt. Properly fasten the fixing bolt, so that the foot is sturdy - fig. 2.
Turn everything around again and place the foot on a sturdy and flat surface.
3. Loosen the fixing knob of the tube under the motor casing and place the fan on top of the inner tube of the pedestal.
Fasten the fixing knob to attach the fan to the pedestal firmly.
The fan is ready for use.
Fig. 1
Fig. 3
ASSEMBLY
Fig. 2
EN - 13