Teka HLB Série Guide D'utilisation page 47

CANCELLING THE PYROLYSIS
Pyrolysis is an automatic function and as
such, can only be activated using the timer
programme. To cancel the pyrolysis the oven
has to be reset, following the instructions below:
1. Press the button.
The pyrolysis will stop.
2. Two situations can arise in relation to the
inside temperature of the oven:
a) Dangerous inside temperature: In this
case, the door will remain locked until the
temperature falls to a safe level. The
symbol will appear on the screen.
When the door is unlocked and can be
opened, the
and the time will be shown again on the
clock display.
b) Safe inside temperature: If the inside
temperature of the oven is safe, it will
unlock immediately.
3. Safe inside temperature: If the inside
temperature of the oven is safe, it will unlock
immediately and the oven will revert to the
standby screen.
English
symbol will disappear
47
User's Guide