PRESIDIUM Diamond Mate PDMT Mode D'emploi page 10

Powering up your Presidium Diamond Mate-C
Batteries will need to be charged for at least 6 hours
prior to the first use. Simply insert the AC adaptor /
Charger (supplied with this model) into a
suitable electrical outlet. Your Diamond Mate can be
used while the batteries are being charged. A fully
charged battery should work continuously for 2 hours.
Batteries do not have to be removed when the AC
adaptor is in use.
Turning on your Presidium Diamond Mate
Remove the protective cover from the probe tip
(Fig 1.3).
Fig. 1.3
Press the [ON/OFF] button (Fig. 1.4) and wait for about
20 seconds to warm up the instrument.
Fig. 1.4
While in this preparation mode, a Green light will blink
continuously. The light will stop blinking when it is
"READY" to be used (Fig. 1.5).
Fig. 1.5
10