Malfunctions; After Sale Service; Spare Parts - SATA dry jet 2 Mode D'emploi

Operating instructions SATA dry jet 2
EN
Notice!
The dry jet gun will quickly become soiled if it is not protected from im-
purities during the spraying process.
Notice!
The sieve is not suitable for cleaning and must be replaced when
clogged (see chapter 10.3).
■ Clean the dry jet gun on the outside with a cloth soaked in cleaning
agent.

11. Malfunctions

The following table describes malfunctions, their causes and correspond-
ing remedies.
If it is not possible to remedy the malfunctions with the described correc-
tive action, send the dry jet gun to the SATA customer service department.
(For address see chapter 12).
Malfunction
Irregular air flow.
Weak air flow.
Dirt particles on
sprayed surface.

12. After Sale Service

Accessories, spare parts and technical support may be obtained from
your SATA dealer.

13. Spare Parts

13.1. SATA dry jet 2
Art. No. Description
[1-1] 222232
68
Cause
Sieve clogged.
Sieve missing.
Impurities in air.
Filter holder
Corrective action
Replace sieve.
Insert sieve.
Use SATA filter 484.
Number
1 pc.