■ Handle [1-4] with air flow control [1-3]
■ Flat fan nozzle [1-6]
5. Scope of Delivery
Notice!
The connection nipple is only included in the standard version. For all
other versions, the connection nipple has to be supplied by the custom-
er. The SATA connection nipple (Art. No. 6981) is necessary for connect-
ing the dry jet gun to a SATA dry jet 2 stand or SATA dry jet 2 stand jum-
bo.
■ Dry jet gun SATA dry jet 2
■ Sieve (set of 3)
■ Flat fan nozzle
■ Connection nipple (for standard version)
6. Technical Design
[1-1]
Filter holder
[1-2]
Sieve (not visible)
[1-3]
Air flow control
Handle
[1-4]
Connection nipple
[1-5]
Flat fan nozzle (rotating)
[1-6]
Nozzle
[1-7]
7. Technical Data
Description
Optimum operating overpressure
Max. operating pressure
Max. operating temperature
Storage temperature
Air consumption
8. First Use
The dry jet gun must be fitted before being used for the first time.
Check after unpacking:
■ Dry jet gun damaged.
■ Scope of supply complete (see chapter 5).
Operating instructions SATA dry jet 2
2.5 bar
10.0 bar
60 °C
-20 °C – 80 °C -4 °F – 176 °F
270 Nl/min at
2.5 bar
Unit
35 psi
145 psi
140 °F
9.5 cfm at 35
psi
EN
63