Block Diagram - HYDAC ELECTRONIC CSI-B-2 Notice D'utilisation

User Manual CSI-B-2

5.3 Block diagram

X1.8 X1.7
supply
DC/DC
converter
HSI
X2.1 X2.3
SMART Sensor
Connecting the PC to the RS232 interface is only possible either on connection
X1 (terminal 5 and 6) or on the SUB-D RS 232 connection. If both connections
are used simultaneously, it can cause the unit to fail.
The CSI-B-2 can also be connected to the USB port on a PC using a RS232-
USB adapter. This adapter is not supplied with the unit and must be provided by
the customer, if required.
18..35VDC
X1.3 X1.4 X1.5 X1.6
RS232
RS485
(-) (+)
X2.2 X2.4 X2.5 X1.1 X1.2
RS485
Receiver /
Transceiver
green
yellow
CSI-B-2
Rt
02/06/2009
Not supplied
with unit!
7