Operations - Clarion CMS 1 Mode D'emploi Et Manuel D'installation

5. OPERATIONS

Basic Operations
Note:
• Be sure to read this chapter referring to the chapter
"4. CONTROLS".
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level may harm your hearings.
Be careful about adjusting the volume.
Turning on and off the power
Note:
• Start the engine before using this unit.
• Be careful about using this unit for a long time
without running the engine. If you drain the vessel
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Start the engine. The power button / knob
illumination on the unit will light up.
2. Press the [ ] power button to turn On or
Off the power.
Selecting a mode
1. Press [SRC] button to display source
menu.
* External equipment not connected to this unit
is not displayed.
2. Press the [ENTER] button to select desired
mode.
Adjusting the volume
1. Press VOL+ button to increase the volume.
Press VOL- button to decrease the volume.
2.
CAUTION
While boating, keep the volume level at
which external sound can be heard.
6
CMS1
Engine ON
position
Mute
Press the [MUTE] button to turn the mute On
and Off.