Jaga AURORA H52-TYPE11 Manuel D'utilisation page 37

SETTING: MINIMUM WATERTEMPERATURE: HEATING - Factory setting: 28°C
How to change the minimum temperatuur?
- +
5x
- +
If the minimum
temperature is reached,
the blue LED flashes
rapidly.
- +
5x
The JDPC controller returns to normal mode, after 30 seconds and will automatically save all changed
settings!
SETTING: MAXIMUM TEMPERATURE: COOLING - Factory setting: 20°C
How to change the maximum temperature?
- +
5x
- +
If the minimum
temperature is reached,
the blue LED flashes
rapidly.
- +
5x
The JDPC controller returns to normal mode, after 30 seconds and will automatically save all changed
settings!
Press and hold the
the
Press short on the
button to decrease or increase the
temperatur 2°C by one step.
24°C 26°C 28°C 30°C 32°C 34°C 36°C 38°C
- 2°C
I
To exit the setup mode by pressing the
red LED
Press and hold the
the
Press short on the
button to decrease or increase the
temperatur 2°C by one step.
12°C 14°C 16°C 18°C 20°C 22°C 24°C
- 2°C
I
To exit the setup mode by pressing the
ton until the
button until
rode LED flashes 5 times.
button or the
+ 2°C
flashes 5 times.
button until
blue LED flashes 5 times.
button or the
+ 2°C
blue LED flashes 5 times.
- +
If the maximum
temperature is reached,
the red LED flashes
I
rapidly.
button until the
- +
If the maximum
26°C
temperature is reached,
the red LED flashes
I
rapidly.
but-
|
jaga AURORA user manual 37
EN