2. Replace the channel at the problem screen with an unallocated channel.
Select a channel of the same channel group. In this case, replace Y4 with Y6.
This action does not break fundamental allocation rule 3.
After Workaround 1
G1
Y4
Unallocated channels
3. You may replace the channel for at the problem screen with the other
unallocated channel.
However, replacing with "the other unallocated channel" may break the fundamental allocation
rule 3. Make sure that allocation follows the fundamental allocation rule 3 to avoid possible
crosstalk.
4. With the entire system running, check neither sound nor caption interruption
occurs at the screens where you replaced the channel.
The workaround is success, if there is no problem.
Detailed examples of workaround 1 can be seen in "Workaround Examples" (page 28).
G2
G3
G4
Y5
Y7
Y1
Y4
G5
G7
Y6
Y2
Y3
G1
G6
Y6
21
GB