Installing The Camera; Wiring - Clarion CC720 Guide D'utilisation

Installing the camera

Option 1: Peel off double-sided tape backing from bracket (A) and place
camera in suitable location.
Adjust camera angle by using adjustment screw.
Option 2: Installing the camera with CAU001 / CAU002 please use bracket B.
*CAU001 /CAU002 not included.
Option 1:
Protective paper
MIC
Mounting bracket A
Option 2:
for CAU001 / CAU002 only
Bracket from CAU001 / CAU002
Mounting bracket B
CAUTION
• When adjusting the camera
position, do not allow the camera
cable to be excessively stretched
or loose.
6
CC720
• Periodically check the tightness of
the installation screws and retighten
if necessary.

6. WIRING

1. Lead the camera cable into the vehicle and align it along the vehicle weather stripping.
Use cable holders as necessary to fix the wires in place to prevent from being pinched in
hinges or dampers.
2. Fix the cable with adequate looseness in this area to prevent it from being stretched or
pinched in the hinge when the rear gate is opened and closed.
Installiation Applications
Rear Mount (Reverse Image) Installation
Rear Mount Installation Wiring:
White Wire (image Control):
- No Connection Required
Green Wire (Distance Guidelines):
- Connected: Distance Guidelines
- No Connection: No Distance Guidelines
Front Mount (True Image) Installation
Front Mount Installation Wiring:
White Wire (Image Control):
- Connection Required
Green Wire (Distance Guidelines):
- Connected: Distance Guidelines
- No Connection: No Distance Guidelines
White Wire
Green Wire
Red Wire:
+12V Reverse Trigger Wire
Black Wire:
Chassis Ground
Yellow RCA:
Video Output
Red RCA:
Audio Output
White Wire
Green Wire
Red Wire:
+12V Reverse Trigger Wire
Black Wire:
Chassis Ground
Yellow RCA:
Video Output
Red RCA:
Audio Output
7
CC720