Youin BK2026B Manuel De L'utilisateur page 18

Instructions for use
percentage. It is possible to extend the life of the battery by carefully following the
instructions provided for charging.
The lithium battery has no "memory". Discharging and partially recharging the battery
does not affect performance or duration. It is therefore possible to recharge the
battery even if it is not completely discharged.
If the bicycle is not used for a long period, keep the battery recharged at least once
a month, leaving it to charge for about 4 hours. In this case, do not pay attention to
the battery charger lights.
When the battery is completely discharged it must be immediately recharged. Do not
leave the battery discharged unused but immediately proceed with a recharge cycle.
In this case, provide for a longer charging cycle, of about 6 hours to allow complete
activation of the battery.
It is recommended to use the bicycle once or twice a year until the battery is
completely discharged. Then fully charge it. This process has a beneficial effect on
battery life.
Battery Assembly
The battery is supplied into the rear carrier.
Remove the battery
• Make sure that the bicycle is firmly on the stand.
• Turn the key 180º to the unlocked position "OPEN" (Pic. 28).
• Firmly grip the battery and pull it back, possibly using the handle located on the
bottom and pushing on the rear
rack.
• Slide the battery into the rails of the luggage rack to extract it completely (Pic. 29).
We recommend holding the
battery with both hands.
• The battery has an ergonomic shape (Pic. 30).
(Pic. 30)
(Pic. 28) (Pic. 29)
Assembly the battery
18
YOU-RIDE LOS ANGELES