How To Use The Bicycle; Assisted Pedaling; Switch The Bicycle On And Off - Youin BK2026B Manuel De L'utilisateur

Instructions for use

HOW TO USE THE BICYCLE

The Assisted Pedaling
This electric bicycle is equipped with an "assisted pedaling system (PAS)", consisting
of a motor, a battery and a pedaling sensor.
It is important to know that when the system is on, the engine undertakes to supply
energy only while you are pedaling. When you stop pedaling, the motor switches off
and the electrical assistance for pedaling is missing.
In all pedal-assisted bicycles, in addition, the engine switches off and the electrical
assistance stops when the maximum speed allowed for electric bicycles of 25 km/h
is reached.
When the speed drops below this value, the electrical assistance starts again until
you stop pedaling.
Even if the brakes are used, the electrical assistance stops.
Switch on the bicycle (Pic. 15)
Switch on the bicycle by the button on the battery
(Pic. 15) and then press the ON / OFF button on the
display on the handlebar to activate the engine.
Start pedaling to activate pedal assistance.
We recommend that you start slowly and gradually
increase your pedaling speed.
YOU ARE USING AN ASSISTED PEDAL BIKE, therefore the engine only starts
pedaling. Stopping pedaling or braking stops the engine.
Switch off the bicycle
Switch off the bicycle the ON / OFF button on the display on the handlebar and then
press the button on the battery (Pic. 15).
Be sure that the bike is off when you are not riding.
12
YOU-RIDE LOS ANGELES