Denon Professional DN-200WS Guide D'utilisation page 5

Setup
Items not listed under
For examples of how you could set up DN-200WS, please see the
Example diagram later in this section.
1. Use either XLR cables or 1/4" (6.35 mm) cables to connect the DN-
200WS's outputs (balanced or unbalanced) to your loudspeakers,
mixer, amplifier, or other device that accepts line-level inputs (this
device must be powered off).
Important: For stereo operation, make sure left (L) and right (R)
outputs are connected to left and right inputs, respectively.
2. Use the included power adapter to connect DN-200WS's power input
to a power outlet.
Important: Do not use DN-200WS near a microwave oven, cordless
phone, Bluetooth
2.4 GHz frequency, which can interfere with the reception.
3. If you are using a mixer, make sure all of its connections are secure,
and power it on.
4. Power on your loudspeakers last.
Introduction > Box Contents
®
device, or other wireless device operating on the
are sold separately.
5