Panasonic CF-VEBC21U Instructions D'utilisation page 9

CAUTION
●
If the port replicator is connected to the computer, connect the LAN cable and VGA cable to the jack and
port on the port replicator. Do not use the LAN port and VGA port on the computer.
●
Do not connect/disconnect peripheral devices in sleep or hibernation.
●
If devices connected to USB 3.0 ports do not operate, confirm the AC adaptor is connected to DC-IN of
the port replicator.
●
When using the USB port, make sure that [Port Replicator USB Port] is enabled in the [Advanced] menu
of the Setup Utility.
●
For more information about the settings and preparations of the peripheral devices, refer to the periph-
eral devices' own operating instructions.
●
When connecting the external display to either of the ports, lines or letters may blur. In that case, lower
the resolution.
9