Before Use; How To Replace The Turntable Stylus (Needle) - Bigben Interactive TD102 Manuel D'utilisation

If this does not solve the problem and the product is still not working as normal, then try using
the product in another location.

Before use

1. Take care choosing where to install the device. Avoid placing it in direct sunlight or close to a
source of heat. Also avoid placing it in locations subject to vibrations, excessive dust, cold or
moisture. Keep away from devices that produce a humming sound, such as transformers or
motors.
2. Do not open the cabinet as this might result in damage to the circuitry or a risk of electric
shock. If a foreign object has somehow entered the unit, please contact your dealer.
3. Do not handle records with dirty fingers. Never play a record that has a crack on the surface.
4. Always pull directly on the plug when removing the power plug from the power socket. Never
pull it out by the cord.
5. Always put the white protective needle cover back on the needle after use, in order to protect
the stylus.
6. Do not attempt to clean the unit with chemical solvents as this might damage the finish.
Use a clean, dry cloth.
7. Unplug the power cord from the wall outlet to fully power down the device. Be sure to unplug
the unit if you do not intend to use it for an extended period of time, for example if you are going
on a trip away.
8. Keep this guide in a safe place for future reference.

How to replace the turntable stylus (needle)

Removing old stylus
1. Hold a screwdriver at the tip of the stylus and push
down in the direction of "A".
2. Remove the stylus by pulling it forward and down.
Installing a new stylus
1. Hold the tip of the stylus and insert the other edge
by pressing in the direction of "B".
2. Push up in the direction of "C" until it locks at the tip.
19