Safety Instructions - Samlex Power PST-150-12 Manuel Du Propriétaire

SECTION 1 |
1.1 IMPORTANT SAFETY INSTRUCTIONS AND SYMBOLS
SAVE THESE INSTRUCTIONS. This manual contains important instructions for models
PST-150-12 and PST-150-24 that shall be followed during installation, operation and
maintenance.
The following safety symbols will be used in this manual to highlight safety
and information:
WARNING!
Indicates possibility of physical harm to the user in case of non-compliance.
!
CAUTION!
Indicates possibility of damage to the equipment in case of non-compliance.
i
INFO
Indicates useful supplemental information.
Please read these instructions before installing or operating the unit to prevent personal
injury or damage to the unit.
1.2 SAFETY INSTRUCTIONS - GENERAL
Installation and wiring compliance
• Installation and wiring must comply with the Local and National Electrical Codes and
must be done by a certified electrician.
Preventing electrical shock
• Always connect the grounding connection on the unit to the appropriate grounding
system.
• Disassembly / repair should be carried out by qualified personnel only.
WARNING!
Opening the case has risk of touching high voltage!
• D isconnect all AC and DC side connections before working on any circuits as-
sociated with the unit. Turning the ON/OFF switch on the unit to OFF position
may not entirely remove dangerous voltages.
• B e careful when touching bare terminals of capacitors. Capacitors may retain
high lethal voltages even after the power has been removed. Discharge the
capacitors before working on the circuits.

Safety Instructions

SAMLEX AMERICA INC. | 3