Profim SYNCHRO Notice D'utilisation page 10

D
Angle of the backrest and the seat
u Adjustment of the angle of the backrest
and the seat
1. Start the mechanism SYNCHRO by turning
lever maximum downwards.
With lever in that position it is possible to adjust
angle between seat and back synchronously.
2. Lean against the backrest until it reaches
desired position.
3. Turn the lever maximum upwards in order
to lock the backrest in desired position.
ATTENTION!!!
- The lever turned maximum downwards – additional
decline of seat and backrest by 3 degrees.
- The lever in mid-position – lack of additional decline
of seat and backrest by 3 degrees.
F
Seat depth adjustment
u
Pull out the button under the seat.
u
Holding the button adjust the seat
to the desired position.
u
Release the button – the seat will lock
in current position.
10
Operating instruction for the SYNCHRO Mechanism
E
Inclination of front part of the seat
u In order to get additional inclination
of the seat turn upwards the two buttons
situated under the front edge of the seat.
By leaning against the front part of seat
you can get it tilted.
u
In order to come back to previous position
of seat turn the buttons downwards and lift
with both hands the front part of seat.
F
E
D