Table Des Matières; Thanks For Choosing Toto; Common Tools Needed; Included Parts - Toto CST746 Manuel D'installation

Thanks for Choosing TOTO!... ........................................................................................... 2

Common Tools Needed .................................................................................................... 2

Included Parts ..................................................................................................................... 2

Before Installation ............................................................................................................... 3
Installation Procedure ........................................................................................................ 3
Maintenance Instructions ................................................................................................... 6
Care and Cleaning .............................................................................................................. 7
CEFIONTECT® Cleaning Instructions...................................................................................7
Warranty ............................................................................................................................ ..8
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and function
as a guiding principle. Congratulations on your choice.
• 10" adjustable wrench
• Carpenter's Level
• Tape Measure
• Hacksaw
• Bowl Wax Ring
• Closet Flange Mounting Bolts
(usually 2 T-bolts, 2 metal washers and 2 nuts)
• Water Supply Line
(typically 1/2" compression to 7/8" ballcock)
• Toilet Seat (TOTO SoftClose recommended)
Check to make sure you have all these parts from the package:
Bowl
Bolt (2x)
Rubber Washer (2x)
TABLE OF CONTENTS
THANKS FOR CHOOSING TOTO!
COMMON TOOLS NEEDED
ADDITIONAL ITEMS (NOT SUPPLIED BY TOTO):
INCLUDED PARTS
Tank and Tank Lid
Metal Washer (2x)
Nut (2x)
• Hand Pliers
• Flat Screwdriver
• Putty Knife
Bolt Cap (2x)
Hand Tight
Base Cap (2x)
Nut (2x)
2
Tank to Bowl Gasket (1x)
Fill Valve
Cone Washer (1x)
Fill Valve T-Nut (1x)