Onkyo TX-8250 Mode D'emploi page 5

> Before Start > Part Names
sound and turns off the display. The LED lights when it
is on, the display turns off, and the "Bass" and "Treble"
settings are disabled.
15.RT/PTY button: Used when receiving stations
transmitting text information (P23).
16.SPEAKER A/B button: Select the terminals to output
audio from between SPEAKERS A/B.
17.INPUT dial: Switches the input to be played. Turn the
control to switch the source in the following order;
BD/DVD#CBL/SAT#PC#GAME#
TV/TAPE#CD#PHONO#AM#FM#DAB*#NET#
BLUETOOTH
* "DAB" can not be displayed if a USB DAB adapter
has not been connected.
18.BASS dial: Adjusts the bass.
19.TREBLE dial: Adjusts the treble.
20.BALANCE dial: Adjusts the balance of the sounds
output from the left and right speakers.
21.BGM 1/2/3/4 buttons: Preset your favorite internet radio
or DAB/AM/FM radio stations (P17, 25).
22.USB jack: A USB storage device is connected so that
music files stored in it can be played. You can also
supply power (maximum 5 V/0.5 A) to USB devices
with a USB cable.
0 When connecting a HDD that requires more than 5
V/0.5 A, connect to the USB port (maximum 5 V/1 A)
on the rear of the unit.
> Install > Initial Setup
  
 
Display
1. The currently selected speaker system lights.
2. Lights in the following conditions.
Ë: When headphones are connected
: When connected via BLUETOOTH
: When connected by Wi-Fi
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network is
not correct.
USB: When "NET" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the USB
is not properly connected.
DIGITAL: Digital signals are input and the digital input selector is
selected.
3. Lights according to the type of input digital audio signals.
4. Lights in the following conditions.
RDS: Receiving RDS broadcasting.
TUNED: Receiving DAB/AM/FM radio
FM ST: Receiving FM stereo.
SLEEP: Sleep timer has been set.
AUTO STBY: Auto Stby (P31) has been set.
5. Flashes when muting is on.
6. Speaker/Channel display: Displays the output channel of the speakers.
7. This may light when performing operations with the "NET" input
selector.
8. Displays various information of the input signals.
> Playback
Supplementary information | Advanced Setup | Others
 
 
En 5