Backrest Angle Setting; Legrest Settings - You-Q LIAM Manuel D'utilisation

4.3

Backrest angle setting

See figure 4.3
1. Loosen the joints (1) by drawing the
strap behind the backrest.
2. Set the desired angle of the
backrest.
3. Take care that both pins left and
right, fit into the locking holes.
4.4

Legrest settings

Lower leg length (fig 4.4).
1. Loosen the star knob.
2. Slide the footplate in the desired
position.
3. Tighten the star knob.
Make sure that there is sufficient free
space under the footplates to operate
the wheelchair over obstacles.
21
Figure 4.3
Figure 4.4