Spare Parts And Accessories - MIRKA 1025 L Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 52
en
Maintenance, cleaning and repair (F+G)
Only carry out maintenance work described in the operating instructions Always pull out the mains plug before
cleaning and maintenance of the dust extractor Never spray water on to the upper section of the dust extractor
Danger for persons, risk or short-circuiting
The use of non-genuine spare parts and accessories can impair the safety of the dust extractor Only use spare parts
and accessories supplied by Mirka Ltd
During maintenance and cleaning, handle the dust extractor in such a manner that there is no danger for maintenance
staff or other persons
In the maintenance area
• use filtered compulsory ventilation
• wear protective clothing
• clean the maintenance area so that no harmful substances get into the surroundings
During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily must be:
• packed in well sealed bags
• disposed of in a manner that complies with valid regulations for such waste removal
A dust test must be performed at least once every year by Mirka service center or a trained person This test includes,
for example, whether there is damage to the filter, the vacuum cleaner is sealed to the air and the control equipment
works properly
Disposal of filter elements and filter bags
Discard filter elements and filter bags in accordance with the national regulations
Transport
Before transporting the dirt tank, close all the locks Do not tilt the dust extractor if there is liquid in the dirt tank Do
not use a crane hook to lift the dust extractor
Storage
The dust extractor must be stored in a dry place and protected from frost
Recycling the dust extractor
As specified in European Directive 2012/19/EU on old electrical and electronic appliances, used electrical
goods must be collected separately and recycled ecologically Contact your local authorities or your nearest
dealer for further information
Further service
Servicing must always be performed by trained personnel To keep the tool warranty valid and ensure optimal tool
safety and function, servicing must be carried out by a Mirka authorized service centre To locate your local Mirka
authorized service centre, contact Mirka Customer service or your Mirka dealer

Spare parts and accessories

Description
Filter element
Fleece filter bag (5 pcs)
38
Mirka® Dust Extractor • 1025 L
Mirka code
8999600411
8999000211

Publicité

Table des Matières
loading

Table des Matières