Hellberg 20912-001 Mode D'emploi page 3

#20939-001
Polycarbonate clear
Chin protection
Length: 220 mm
Thickness: 1 mm
Weight: 110 g
CE EN 166/1B39
EN 170/2-1,2
Suitable for: Grinding,
construction work, general
industry work.
#20967-001
Polycarbonate clear
Resistance to electric arc
Length: 200 mm
Thickness: 1,5 mm
Weight: 116 g
CE EN 166/1B389
EN 170/2-1,2
Suitable for: Electrical
work <400V
Tested to EN166 & EN1731 in compliance with the European Directive 89/686/EEC. Finnish Institute of
Occupational Health (FIOH), Topeliuksenkatu 41aA, 00250 Helsinki, Finland. Notified Body: 0403
Tested to ANSI Z87.1-2003 and CAN/CSA Z94.1-2007.
Intertec, 3933 US Route 11 Cortland, New York 13045
#20940-001
Polycarbonate clear, anti fog
Length: 250 mm
Thickness: 1 mm
Weight: 96 g
CE EN 166/1B39N
EN 170/2-1,2
ANSI Z87+, CSA Z94.3-2007
Suitable for: Grinding,
construction work, general
industry work, outdoor work
EN 166:2001 - European standard for eye protection
EN 1731:2006 - European standard for mesh type eye and
face protection
EN 166 & EN 1731 visor approvals and markings:
1: optical rating class
B: protection from medium energy impacts
F: protection from low energy impacts
3: protection from liquid splashes
8: protection from short circuit electric arc
9: resistance to molten metal droplets and
penetrations of hot solids
N: anti fog properties
Additional visor approvals and markings:
EN 170/2-1,2:
EN 171/4-5:
EN 172/5-2,5:
ANSI - Visor markings:
Z87 Basic impact protection
Z87+ Basic and High impact protection
#20942-001
Polycarbonate, goldplated
Length: 250 mm
Thickness: 1 mm
Weight: 98 g
CE EN 166/1B9
EN 171/4-5
Suitable for: Radiant heat,
foundry, molten metal work.
UV scale number
IR scale number
Sunglare scale number
3