Technical Information; Installation Considerations - Hansgrohe AXOR Urquiola 11901 1 Série Instructions De Montage / Mode D'emploi / Garantie

Table des Matières

Publicité

14¾"
1¾"
3⅝"
2
9⅞"
6¼"
1¾"
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - showerhead
Flow rate - handshower
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This product requires rough 10902181 (not
included). The rough must be installed and the
finished wall completed and made watertight
before installation of the trim kit.
• Protection against backflow is provided by check
valves.
• To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum out-
put temperature can be no higher than 112° F.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
2.5 GPM
2.5 GPM

Publicité

Table des Matières
loading

Table des Matières