Led Functions - Ryobi OP140 Manuel D'utilisation

CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may be-
come hot. A hot battery pack may be placed directly onto
the charger port but charging will not begin until the battery
temperature cools to within acceptable temperature range.
When a hot battery pack is placed on the charger, the red
LED will begin flashing and the green LED will be off. When
the battery pack cools, the charger will automatically begin
charging.

LED FUNCTIONS

See Figure 1, page 7.
BATTERY PACK
Power On
Alimentation Power On
Corriente
Without battery pack
Testing
Evaluer Testing
Evaluar
Hot battery pack
Cold battery pack
Deeply discharged
Defective
Defective
Defectueux
Defectuoso
Defective
• If defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status repeats a
second time, try charging a different battery.
• If a different battery charges normally, dispose of the defective pack (see Maintenance section).
• If a different battery also indicates "Defective," the charger may be defective.
Charging
En charge
Charging
Cargando
Fast charging
Charged
Charge max.
Charged
Completo
Battery full
Energy Save
Mode
Energy Save Mode
Mode d'économie
d'énergie
Modo de ahorro
de energía
Battery full /
Energy Save mode
NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 6 AFTER FRENCH
AND SPANISH LANGUAGE SECTIONS. ILLUSTRATIONS START ON PAGE 7.
OPERATION
RED GREEN
LED LED
ON OFF Ready to charge battery pack.
Flashing OFF When battery pack reaches cooled temperature, charger begins fast charge mode.
Flashing OFF When battery pack reaches warmed temperature, charger begins fast charge mode.
Charger conditions battery until normal voltage is reached, then begins fast charge
Flashing OFF
mode.
Fading OFF Battery pack or charger is defective.
ON Flashing Battery is being charged.
OFF ON Fast charging is complete; charger maintains charge mode.
OFF Fading Battery pack is fully charged and charger is in Energy Save mode.
This product has a Three-year Limited Warranty.
For Warranty details go to www.ryobitools.com
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger
port but charging will not begin until the battery temperature
warms to within acceptable temperature range. When a cold
battery pack is placed on the charger, the red LED will begin
flashing and the green LED will be off. When the battery
pack warms, the charger will automatically begin charging.
ACTION
5