emerio TFN-214473.1 Mode D'emploi page 8

FILTER REPLACEMENT
This appliance is equipped with an air cleaning filter. Before using the appliance, the filter should be installed in
it so that the air can be cleaned. Installation and replacement method of the air cleaning filter are as follows.
Turn the top cover of the filter
counter clockwise to unlock and
remove the filter.
Attach the new filter to the top
cover. Make sure
connected firmly.
Replacing the filter alarm clock
The fan has a memory function. After a total of 720 hours of operation, the digital display (as shown in the figure)
will light up for about 5 seconds with the indicator light cycling when the fan is turned on.
After replacing the filter, press and hold the power button on the remote control for 5 seconds to clear the alarm
and the operating time of the filter reclocks again.
Disconnect the old filter from the
top cover. Pull it out directly.
After assembling, put it back into
they are the main body and turn it
clockwise to secure it.
- 7 -