emerio TFN-214473.1 Mode D'emploi page 6

Note: Most functions of the appliance can only be controlled by remote control. If you have lost the remote
control or if it is damaged, please contact our customer service.
The remote control should be pointed at the signal receiver on the digital display to maximize the remote control
signal.
Possible phenomenon
1. This fan may respond to the remote control of other devices.
2. If you use the remote control of this fan, other devices may respond.
This is due to the overlapping frequencies of the remote control. There is no quality problem in the product itself.
To avoid misuse, keep the remote control away from other electrical devices during operation.
OPERATION
1. Before use, hold the fan body with one hand and the other hand to set the wind outlet 15° before and after.
2. Connect the adapter into the power connection of the fan fist and then insert the adpater into a suitable
power outlet. The digital display lights up and the fan goes into standby mode.
3. To switch on and off:
Press the touch screen button (the digital display) the buzzer will beep once and the fan will start. Press and
hold the touch screen button for 2 seconds the buzzer will beep twice and the fan will stop running after you
release your hand.
4. To set the air volume:
When the fan is operating press the touch screen button to adjust the air volume from 1 to 9.
5. To set the oscillation function:
When the fan is operating press and hold the touch screen buton for 1 second. The buzzer will beep once
and the fan will start oscillating. Press and hold the touch screen button for 1 second again. The buzzer will
beep once and the fan will stop oscillating.
Buckle
- 5 -