Operating On External Power Sources; Operating On Ac Power Adaptor - Sony ICF-SW7600GR Mode D'emploi

Operating on external power
sources
The unit can also be operated by connecting the AC power adaptor to the DC
IN 6V (external power input) jack.
Tip
When an external power source is connected, the unit automatically switches
to the external power source, regardless of whether the batteries are installed.
Notes
• Keep the batteries installed even when operating on external power sources as
backup for the unit's microcomputer. Replace the batteries about once a year.
• Turn off the unit when connecting or disconnecting external power
sources. Otherwise, the power may go off and "E" may appear. In
this case, turn on the power again to clear the "E" display.
• When operating the unit on batteries, first disconnect the AC power
adaptor from the wall outlet, then disconnect the AC power adaptor
from the DC IN 6V jack of the unit. The unit will not operate on
batteries as long as the DC IN 6V jack is plugged in.
• Use only the recommended AC power adaptor
manufactured by Sony. Using AC power adaptors
with different specifications (polarity of the plug,
etc.) will result in malfunction and damage to the
unit.

Operating on AC power adaptor

Connect the optional AC power adaptor AC-E60HG to the DC IN 6V jack.
1
to DC IN 6V jack
1
Connect the AC power adaptor securely to the DC IN 6V jack.
2
Connect the AC power adaptor securely to a wall outlet.
Notes
•Do not bend or twist the power cord forcibly. Do not place heavy
objects on the power cord.
•Always hold the plug when disconnecting the power cord. Do not pull
the cord itself.
•Disconnect the AC power adaptor from the wall outlet and radio when
the unit is not to be used for a long period of time.
10 GB
Power sources
Polarity of the plug
2
to a wall outlet