D-Link DKVM-4U Guide D'installation page 3

Switching with the DKVM- 4U
The DKVM-4U features a Select Button located on the top panel to switch quickly and easily between
both your computers.
Select
Button
You can also use keyboard Hot Keys to switch between your computers. Press the Scroll Lock key
twice to enter Hot Key switching mode. A beep confirms that the Hot Key mode is activated.
Hot Key Menu
• Scroll Lock + Scroll Lock + 1 : Switches to PC 1
• Scroll Lock + Scroll Lock + 2 : Switches to PC 2
• Scroll Lock + Scroll Lock + 3 : Switches to PC 3
• Scroll Lock + Scroll Lock + 4 : Switches to PC 4
• Scroll Lock + Scroll Lock + --> : Switches to next PC
• Scroll Lock + Scroll Lock + <-- : Switches to previous PC
• Scroll Lock + Scroll Lock + B : Turns beeper ON/OFF
• Scroll Lock + Scroll Lock + M : Resets the mouse and keyboard
• Scroll Lock + Scroll Lock + S : Activates Auto Scan Mode. Each computer will be scanned
every 10 seconds. Press the space bar to exit Auto Scan Mode
Troubleshooting
Keyboard/ Mouse
If your keyboard or mouse is not functional, not detected, or there is a keyboard/mouse error on boot-
up, check the following:
•
Make sure that the cables are properly connected between the DKVM-4U and the computer(s), and
the keyboard/mouse to the DKVM-4U.
•
Verify that the keyboard/mouse works when plugged into the computer directly. You will have to
shut down your computer first to do this.
•
Try using a different keyboard/mouse.
•
If mouse movement is random when switching between computers, try shutting down your
computer and rebooting.
•
If a special mouse such as a cordless or scrolling mouse is used, make sure you use generic USB
mouse drivers. A non-standard USB mouse may have extensions on the USB protocol that are not
supported by the DKVM-4U.
•
Do not move the mouse or press any mouse buttons when switching from one PC to another.
•
Try resetting the mouse by unplugging it from the DKVM-4U for about 3 seconds and reconnecting.
Video
If the image on your monitor is not clear, check the following:
•
Verify that all video monitor cables are inserted properly.
•
Try lowering the resolution and refresh rate of your monitor.
•
Try using a shorter video cable.
Technical Support
Thank you for choosing D-Link products. For further information, support and product manuals please
visit the D-Link website at www.dlink.eu.
www.dlink.co.uk
: 08456 12 0003
2