Measuring Object Temperature - Sanitas SFT 53 Mode D'emploi

Note
If no button is pressed for one minute after the measurement,
the ear thermometer automatically switches itself off again.
Fever indicator
If the measured temperature is < 38 °C (100.4 °F), a laughing
smiley appears on the display and a short acoustic sig-
nal sounds.
If the measured temperature falls between 37.5 and 37.9 °C,
two short acoustic signals will also sound (the indication for
"raised temperature").
If the measured temperature is ≥ 38 °C (100.4 °F), a sad smiley
appears on the display and a short, a long and three short
acoustic signals sound one after the other.

7.2 Measuring object temperature

1. Remove the protective cap from the
sensor tip of the ear thermometer (if
it is on).
2. Press the ON/OFF button
on the ear thermometer. Three acoustic
signals sound and the display switch-
es on.
to switch
3. Ensure that you are in object tempera-
ture mode ( ).
To switch between body temperature
and object temperature mode, brief-
ly press and hold the ON/OFF button
and the START button at the same
time.
4. Hold the sensor tip of the ear thermom-
eter 1 to 2 cm from the desired measur-
ing point and press the START button.
5. After one second, a long acoustic sig-
nal sounds and the measurement is
shown in the display. Briefly press the
ON/OFF button to switch off the ear
thermometer.
23