Resetting The Unit - Sharp EL-1611PA Mode D'emploi

Operation time:
Automatic Power-off:
Dimensions:
Weight:
Accessories:
SHARP will not be liable nor responsible for any
incidental or consequential economic or property
damage caused by misuse and/or malfunctions of this
product and its peripherals, unless such liability is
acknowledged by law.
10
Manganese dry battery, size AA (or R6)
Approx. 5,000 hours (in non-print
mode, displaying 555'555 at 25°C
(77°F) ambient temperature)
Operating time depends on the type of
battery and type of use.
Approx. 12 min.
99 mm (W) × 191 mm (D) × 42 mm (H)
(3-29/32" (W) × 7-17/32" (D) × 1-21/32"
(H))
Approx. 238 g (0.53 lb.) (with batteries)
1 paper roll, 1 ink roller (installed), AC
adaptor EA-28A, and operation manual

RESETTING THE UNIT

Strong impacts, exposure to electrical fields, or other unusual
conditions may render the unit inoperative, and pressing the
keys will have no effect. If this occurs, you will have to press the
RESET switch on the bottom of the unit. The RESET switch
should be pressed only when:
• an abnormal event occurs and all keys are disabled.
• you install or replace the batteries.
Notes:
• Pressing the RESET switch will clear the stored tax rate and
other data stored in the memory.
• Use only a ballpoint pen to press the RESET switch. Do not
use anything breakable or anything with a sharp tip, such as
a needle.
• After pressing the RESET switch, press
that "0." is indicated.
to make sure