Resetting The Unit - Sharp EL-2607P Mode D'emploi

RESETTING THE UNIT

Strong impacts, exposure to electrical fields, or
other unusual conditions may render the unit
inoperative, and pressing the keys will have no
effect. If this occurs, you will have to press the
RESET switch on the bottom of the unit. The
RESET switch should be pressed only when:
• an abnormal event occurs and all keys are
disabled.
• you install or replace the battery.
Notes:
• Pressing the RESET switch will clear the stored
tax / discount rate and other data stored in the
memory.
• Use only a ballpoint pen to press the RESET
switch. Do not use anything breakable or
anything with a sharp tip, such as a needle.
• After pressing the RESET switch, connect the
power supply plug to an outlet. Turn the power
switch "ON" and check that "0." is displayed.
13