Temperature Control; Filter Reset - LG LW6015ER Guide D'utilisation

Cool - Compressor runs and cools the room. Use the
set the desired temperature and circulation fan speed.
Fan
- Fan circulates air but compressor does not run. Use the FAN button to set
the desired fan speed.
Dry
- Dry mode is used to remove humidity from the room without additional cooling.
Once the set temperature is reached， the compressor and circulation fan turns off.
Fan speed is pre-set and cannot be adjusted.

TEMPERATURE CONTROL

The thermostat monitors room temperature to maintain the desired temperature.
The thermostat can be set between 16 C~30 C (60 F~86 F).

FILTER RESET

'Clean Filter' LED will light up to notify you that your filter needs to be cleaned.
After cleaning the filter, press 'Filter Reset' button to turn off ' Clean Filter' light.
This feature is reminder to clean the Air Filter (See Maintenance) for more efficient operation.
The LED (light) will illuminate after 250 hours of operation.
During operation in failure of electric power, the unit runs as previous setting operation.
ENERGY SAVER
The unit defaults to Energy Saver mode each time the unit is switched on except
restoration after an electrical power outage and fan mode.
Battery
one battery
battery
the battery is new.
and FAN buttons to
battery The battery
the battery