Safety Instructions - FISCHER 126000 Mode D'emploi Original

Dear customer,
GB
thank you for buying the Fischer folding roof box.
Please make sure you assemble the folding roof box according to these instructions
before using it for the first time.

1. Safety instructions

NOTE:
read these operating instructions carefully before starting to assemble your new roof box.
Observe all safety instructions.
• Keep the operating instructions for the entire service life of the product
• Pass on the instructions onto the new owner or user of the product if sold or borrowed
IMPORTANT NOTE:
roof. You will also need to comply with the manufacturer's guidelines for the maximum permissible load on the
roof bars. This roof box was carefully developed, manufactured and tested according to safety regulations based on
DIN 75302.
Technical data:
• Weight of roof box: 6 kg
• Max. load: 44 kg
• Max. total weight: 50 kg
Warning
• When driving your car with a loaded roof, do not forget that your vehicle is higher than usual. Be particularly careful
when entering tunnels, underpasses, garages, car parks, etc.
• After having driven a short distance, check to make sure that the entire system is correctly fastened, the belts are
adjusted correctly and that all screws are tightened. Carry out regular checks over the duration of your journey.
Additional checks may be necessary depending on the condition of the road surface.
• Over time, the straps and screws may start to show signs of wear. They must be replaced as soon as any deterioration
in quality is visible.
• Be aware that driving conditions and the braking response will change according to the load on the vehicle. Adapt your
driving style and reduce your speed when driving with any load on the roof.
• Cross winds, sudden braking, tight curves, high speeds and driving over hilltops and uneven road surfaces alter the
driving conditions of the vehicle. Reduce your speed and always observe the legal speed limit. Do not under any
circumstances let your speed exceed 130 km/h.
• The manufacturer cannot be held responsible for any damage caused as the result of driving at high speed or incorrect
driver behaviour.
• Ensure that the anchoring elements and the bolts are tight and the load is secured correctly both before setting off and
regularly during your journey.
• Ensure the load is secure and cannot slip.
• Ensure the roof box is securely closed before starting your journey.
• Difficult to see objects must not protrude beyond the profile.
• The roof box must always be assembled with the side that opens facing the back of the vehicle.
• For safety reasons, the roof box must be assembled so that it can be loaded and unloaded from the passenger side
of the vehicle.
• In order to avoid increased lift, the roof box must be assembled perfectly flat in the direction of travel.
• In order to protect other road users and to increase fuel efficiency, the roof box should be removed when not in use.
• The roof box should be removed when cleaning the vehicle.
• Do not cover the roof box with any items which can become dislodged as a result of wind.
• This system requires careful assembly and strict adherence to the assembly and operating instructions. Remember that
you are responsible for your own safety and for the safety of others when transporting anything using the roof box.
• You must comply with local regulations at all times.
• You are responsible for informing any other drivers using the roof box of these instructions.
4
126000INT_FZ_FISCHER_Faltbare_Dachbox_BAL_200710.indd 4 126000INT_FZ_FISCHER_Faltbare_Dachbox_BAL_200710.indd 4
Refer to the car manufacturer's guidelines on the maximum permissible load on the
10.07.20 11:30 10.07.20 11:30