Charger Layout; Special Features - HITEC X4 Advanced Mode D'emploi

2.2. Charger Layout

Slot Number Button
LCD Display
Up Button
Down Button

3. Special Features

· Four independent slots: there are four independent
charger-analysers for AA and AAA NiMH/NiCd batteries.
· Larger LCD display with backlit for easy reading.
· Digitally display various modes during operation. Also
the charging current (in mA), accumulated charging
capacity (in mAh), the voltage (in Volt) and time elapsed
(in hh:mm).
· Seven buttons for easy programming and operation:
four Slot Number Buttons (SNB) to display individual slot
operation data during the various operation mode, and
other three buttons for programming and operation.
· Five modes of operation: Charge, Refresh & Analyse,
Break-In, Discharge and Cycle.
· Turbo fast charging – 60 minutes to charge up
2500 mAh batterys.
· Charging current from 200 mA to 2500 mA.
· Discharging current from 100 mA to 1000 mA.
· Smart phone control-support both Apple iPhone and
Android smart phone.
Battery
Battery Bays
Bluetooth Indicator
USB Power
5 V/1 A
Enter Button Smart Ventilation Fan
· Negative delta peak ( U) value adjustment via
smart phone.
· Battery internal resistance and voltage graphic can be
displayed via smart phone.
· USB ports, 5 V 1 A for charging smart phone, MP3 and
digital camera.
· Smart cooling fan
· Worldwide voltage AC adaptor (12 V/2.5 A)
· Damaged battery detection: To ensure safety, the charger
performs an "impedance check" at the beginning of the
program. If the battery fails this test, "FAIL" would be
displayed and program will be terminated.
· Built-In PTC thermistor to avoid over heat and independent
negative delta V eliminates over and undercharging.
· Firmware is ungradable via smart phone.
12 V DC Plug Anti Skid Rubber
Tilt Stand
15