Safety Instructions - i-tec U3HDMI4K Mode D'emploi

DRIVER INSTALLATION IN MAC OS X
ATTENTION! Do not connect the dock to your Mac until you install the
appropriate drivers. Drivers must only be installed before first use. We
recommend that you have the latest MacOS operating system installed.
Download drivers from our website www.i-tec.cz/en/ on the "Manuals,
drivers" tab of this product and run the installation.
HARDWARE INSTALLATION (CONNECTING THE ADAPTER
TO A MACBOOK / PC)
1. Turn on the MacBook / PC and connect the USB cable to the Micro '
USB 3.0 port.
2. Connect the USB 3.0 cable to the MacBook / PC to a free USB 3.0 / 2.0 port.
3. After this, the automatic installation of the drivers in the individual
systems will start.
4. Restart the MacBook / PC.
5. Connect the HDMI cable to the USB 3.0 4K Ultra HD Display Adapter and
to the monitor. After connecting, the screen may glimmer – this is
a standard process.
The installed ports are displayed in macOS X as „USB3.0 UHD HDMI Adapter"
in „About This Mac" → „System Profiler" → „Hardware" → „USB".
UNINSTALLING THE DRIVERS
Use the default uninstall via Control Panel-Add or Remove Programs-Remove:
• DisplayLink Core Software for Video drivers

SAFETY INSTRUCTIONS

• Do not expose to the extreme temperatures and air moisture.
• Use the device on the flat pads – you avoid the slip and fall on the ground.
• Keep the activators and manual for the later possible use.
You can find useful informations on the DisplayLink website
at https://support.displaylink.com/ on the FAQ tab or
you can contact our technical support.
Quick Start
ENGLISH | 7