Service And Maintenance - Festool OSC 18 Notice D'utilisation D'origine

machine, decreasing the quality of the working
results and accelerating machine wear.
The PO numbers of the accessories and tools
can be found in the Festool catalogue or online
at "www.festool.co.uk".
11.1 Mounting the adapter [5]
A depth stop, dust extraction device and posi­
tioning aid can be mounted on the adapter. Us­
ing the detent button [5-1], these can be offset
in 30° increments in line with the tool.
11.2 Dust extraction device [6]
► Mount the adapter [5].
► Attach the dust extraction device.
► Connect the suction hose.
11.3 Depth stop [7+8]
► Mount the adapter [5].
► Attach the depth stop – [7a] or [7b].
► Engage the adjusting lever [8-1] to set the
cutting depth.
Select the correct depth stop for the
tool and replace if necessary:
Round tools
Cutting blade Rotary depth
11.4 Positioning aid [9+10+11]
WARNING
Sharp tools
Pinching and cutting injuries
► Always rest your fingers on the defined
gripping surfaces [10-3].
► Always use the saw blades indicated in Fig.
[10]. Do not use short saw blades.
WARNING
Risk of accident, electric shock
If the tool comes into contact with live ca­
bles, an electric current may be diverted
through metal components in the tool and
result in electric shock.
► Hold the power tool by the insulated grip­
ping surfaces when performing work that
may pose a risk of cutting into hidden pow­
er cables.
Using the positioning aid
► Mount the adapter [5].
► Attach the positioning aid – [9a] or [9b].
Sliding shoe [8-2]
stop [8-3]
► Adjust the cutting depth [10-1].
Always tighten the cutting depth adjust­
ment [10-1].
Readjusting the saw blade guidance
► Set the cutting depth [10-1] to the maxi­
mum depth. Tighten the cutting depth ad­
justment [10-1].
► Loosen the screw [11-1] on the saw blade
guidance [11-2].
► Move the saw blade guidance to the saw
blade.
► Tighten the screw [11-1] on the saw blade
guidance.

12 Service and maintenance

WARNING
Risk of injury, electric shock
► Always remove the battery pack from the
power tool before performing any mainte­
nance or service work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
Customer service and repairs
must only be carried out by the
manufacturer or service work­
shops. Find the nearest address
at: www.festool.co.uk/service
Always use original Festool
EKAT
spare parts. Order no. at:
4
www.festool.co.uk/service
5
3
2
1
To ensure constant air circulation, always keep
the cooling air openings in the motor housing
clean and free of blockages.
Keep the contacts on the power tool, charger
and battery pack clean.
When machining materials that contain gyp­
sum, dust deposits may build up inside the
power tool and on the on/off switch and harden
when exposed to humidity. This may impair the
switching mechanism. After each machining
process, blow out the inside of the power tool
through the vents and the on/off switch using
dry, oil-free compressed air.
English
17