Safety Warnings - Festool OSC 18 Notice D'utilisation D'origine

Contents
1 Symbols..................................................... 13

2 Safety warnings.........................................13

3 Intended use..............................................14
4 Technical data........................................... 15
5 Parts of the device.....................................15
6 Operation................................................... 15
7 Battery pack.............................................. 15
8 Settings......................................................15
9 Working with the machine........................ 16
10 Acoustic warning signals.......................... 16
11 Accessories............................................... 16
12 Service and maintenance..........................17
13 Environment.............................................. 18
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Risk of pinching fingers and hands!
Danger area! Keep hands away!
Inserting the battery pack
Removing the battery pack
Do not dispose of it with domestic
waste.
Tip or advice
Handling instruction
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" used in the safety in­
structions refers to mains-powered power tools
(with power cable) or battery-powered power
tools (without power cable).
Follow the operating manual for the charger
and the battery pack.
2.2 Machine-specific safety notices
Hold the power tool by insulated gripping
-
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contact­
ing a "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
Use clamps or another practical way to se­
-
cure and support the workpiece to a stable
platform. Holding the workpiece by hand or
against your body leaves it unstable and
may lead to loss of control.
Use appropriate detection devices to look
-
for any hidden supply lines or consult your
local utility company. If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
Harmful/toxic dust may be produced dur­
-
ing your work (e.g. paint containing lead,
certain types of wood and metal). Only
qualified persons are permitted to handle
materials containing asbestos. Contact
with or inhalation of this dust may pose a
risk for the operating personnel or persons
in the vicinity. Comply with the safety regu­
lations that apply in your country.
Wear a P2 respiratory mask to protect
your health.
-
Wear suitable personal protective equip­
ment: Ear protection, protective goggles,
English
13