Stopping The Engine; Setting Engine Speed - Honda GXV630 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour GXV630:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.
Move the throttle lever away from the SLOW position, about 1/3
of the way toward the FAST position.
Some engine applications use a remote-mounted throttle
control rather than the engine-mounted throttle lever shown
here. Refer to the instructions provided with the equipment
powered by this engine for remote control information.
THROTTLE LEVER
4.
Turn the engine switch to the ON position.
5.
Operate the starter.
Turn the engine switch to the START position, and hold it there
until the engine starts.
If the engine fails to start within 5 seconds, release the engine
switch, and wait at least 10 seconds before operating the starter
again.
Using the electric starter for more than 5 seconds at a time will
overheat the starter motor and can damage it.
When the engine starts, release the engine switch, allowing it to
return to the ON position.
6.
Warm up the engine for 2 or 3 minutes.
7.
If the choke lever was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine
warms up.
CHOKE LEVER
C
C
L
L
O
O
S
S
E
E
D
D
S
S
L
L
O
O
W
W
FAST
O
O
P
P
E
E
N
N

STOPPING THE ENGINE

To stop the engine in an emergency, simply turn the engine switch
to the OFF position. Under normal conditions, use the following
procedure. Refer to the instructions provided by the equipment
manufacturer.
1.
Move the throttle lever to the SLOW position.
Some engine applications use a remote-mounted throttle
control rather than the engine-mounted throttle lever shown
here. Refer to the instructions provided with the equipment
powered by this engine for remote control information.
THROTTLE LEVER
2.
Turn the engine switch to the OFF position.
3.
If the fuel tank is equipped with a valve, turn the fuel valve to the
CLOSED or OFF position.

SETTING ENGINE SPEED

Position the throttle lever for the desired engine speed.
Some engine applications use a remote-mounted throttle control
rather than the engine-mounted throttle lever shown here. Refer to
the instructions provided by the equipment manufacturer.
For engine speed recommendations, refer to the instructions
provided with the equipment powered by this engine.
THROTTLE LEVER
Do not disconnect the battery from the engine while the engine is
running. Disconnecting the battery causes the fuel-cut solenoid to
shut off the flow of fuel to the carburetor main jet, and the engine
will stop.
ENGLISH
S
S
L
L
O
O
W
W
S
S
L
L
O
O
W
W
F
F
A
A
S
S
T
T
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gxv660Gxv690

Table des Matières