Michelin 92418 Mode D'emploi page 19

TROUBLE SHOOTING
Pumping but tyre is not inflating
Gauge does not display when tyre valve is con-
nected
DIGITAL FOOTPUMP
1. psi, bar & kPa button / Reset button
2. White L.C.D digital display
3. Ergonomic rubber tread plate
4. Rubber feet
5. Locking lever
6. 67 cm (approx) high pressure air hose with tyre valve connector
7. Adaptors (snap-in storage under display unit)
SPECIFICATIONS
Pressure accuracy
Pressure resolution
Battery type
Hose length
THIS DIGITAL FOOT PUMP IS FITTED WITH A BATTERY OPERATED DIGITAL GAUGE
„ Check that the tyre valve adaptor is correctly
fitted to tyre valve.
„ Ensure tyre valve is correctly connected to the
tyre valve adaptor.
+/- 1 psi up to 50 psi
psi / bar / kPa
2 x CR2032
67 cm (approx)
EN
19