Maintenance And Cleaning; Troubleshooting; Storage - Imetec Q8601 Mode D'emploi

padlock symbol.
• To unlock them, press the plate lock (5) with the open padlock
symbol.
EN

MAINTENANCE AND CLEANING

• After each use, empty the water reservoir (2), dry it and clean it
with a cloth.
• Wait for the heating plates (9/10) to cool down.
• Clean the surface of the heating plates (9/10) and the handle with
a soft, damp cloth.
Problem
The appliance does
not produce steam
Water leaks from the
reservoir
WARNING! Always disconnect the
appliance from the socket
cleaning or performing maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.

TROUBLESHOOTING

The reservoir is empty
The reservoir is not
attached to the base
The rubber cap of the
reservoir is not closed
properly
The rubber cap of the
reservoir is torn

STORAGE

WARNING! Risk of fire. Wait for the
appliance to cool completely before
storing it.
Cause
18
before
Solution
Fill the reservoir and
activate the steam by
pressing the heating
plates all the way down
for about 5 times
Set it correctly in place
Close the rubber cap
carefully
Go to an authorised
assistance centre