Elesta RTM501B Mode D'emploi page 17

Dimensions:
Weight:
Installation:
EMC normative references:
LVD normative references:
R&TTE normative references:
OVERVIEW
This device is a one-channel receiver designed to switch on loads (more
precisely, electro-thermal valves or circulators) via radio in home or office
heating/cooling systems.
It has 1 channel that can be associated with an independent transmitter (wireless
thermostat or chronostat). This system is an optimal solution for buildings
in which wires cannot be laid between thermostats and the environment to
be controlled. Operating on a frequency of 868.150 MHz (LPD) provides the
user with all the advantages of this band, such as the greatest freedom from
interference and greater efficiency in the transmission of the signal.
OPERATION
Each thermostat or chronostat transmitter sends radio commands to the
receiving unit based on the heating and cooling requirements of the room
where it is located. These radio commands are then received and decoded by
the receiving unit, which is usually installed in the same room as the boiler or air
85 x 85 x 31 mm (L x A x P)
~ 126 gr.
Wall mounted
CEI EN 55014-2 1998-10
ETSI EN 301 489-3 v1.4.1 (2002)
ETSI EN 301 489-1 V1.6.1 (2005)
CEI EN 60730-1 (2002)
ETSI EN 300 220-2 v2.1.2 (2007-06)
17