Remote Control - Denon Professional DN-700AV Guide D'utilisation

Remote Control

Power: Turns the power on and off for the unit.
Mute: Silences the audio output.
Zone On/Off: Turns on/off the video/audio output for the selected zone.
Zone Select: Switch which input source will be mapped to the selected zone.
Display: Press to view the input source settings on your TV or monitor.
Stereo/Direct: In Stereo mode, sound is output from the front left and right speakers and subwoofer. If
multichannel signals are input, they are mixed down to 2-channel stereo audio. In Direct mode, the audio is
played back how it was recorded.
Menu: Access the settings for adjusting video settings, audio settings, input sources, system settings, and the
Setup Wizard.
Speaker Setup: Adjust the parameters for surround sound speaker outputs. Select the type of speaker (small or
large) connected to the surround outputs using the  or  buttons.
Cursor Buttons: Selects an audio track or navigates through the menus.
Enter: Press to confirm a menu selection.
Back: Press to go to the previous menu or exit out of a menu.
OSD: Press to turn off the on-screen front panel display.
DVD: Selects the DVD input source.
BD: Selects the BD input source.
DOCK: Selects the DOCK input source.
SAT/CBL: Selects the SAT/CBL input source.
CD: Selects the CD input source.
Multimedia: Selects the Multimedia input source.
BT: Selects the BT input source.
FM: Selects the FM input source.
HDMI: Press to cycle through one of the 6 HDMI input sources.
Surround: Select from the different surround sound modes.
DTS/Dolby: Selects DTS or Dolby sound types. When playing back audio sources encoded in DTS, accurate
sound field position and realistic sound is heard similar to being in a movie theater. When Dolby is selected, this
multi-channel digital signal format uses 5.1 channels: 3 front channels ("FL", "FR" and "C"), 2 surround channels
("SL" and "SR") and the "LFE" channel for low frequencies. Because of this, there is no crosstalk between
channels and a realistic sound field with a "three-dimensional" feeling (sense of distance, movement and
positioning) is achieved.
Audio In: Select an audio input to map to a source. Select from HDMI, Analog, Coax (coaxial), and Opt
(optical).
Station +/-: Press these buttons to cycle through one of 20 radio station memory locations.
Tone: Adjusts the treble and bass qualities for the sound source.
Channel Select: Press this button to cycle through each of the surround sound channels to adjust the output level.
Volume +/-: Adjust the master volume for the input source.
|<<: Skip to the previous USB track, Bluetooth track, or multimedia track.
>>|: Skip to the next USB track, Bluetooth track, or multimedia track.
Play/Pause: Play/pause the USB track, Bluetooth track, or multimedia track.
Stop: Stop the current USB track, Bluetooth track, or multimedia track.
Stereo: Press to select to have a stereo signal outputted alone or to have a stereo signal with the subwoofer output.
Stereo/Mono: Press this button to alternate between Stereo mode and Mono mode.
Sub On/Off: Turn the subwoofer audio output on/off.
LFE Trim: This Low Frequency Effect emphasizes low frequency sound, outputting 20 Hz to 120 Hz bass.
Tuning -/+: Selects the FM radio station.
Memory: When playing back files from a network/media server or listening to the radio, press MEM to register the file/radio station as a
favorite.
PTY (Program Type) Search: Press this button to search for a certain style of radio programming.
Note: This only applies to FM mode.
Note: RDS is a method for the transmission of additional information via VHF stations. For example, the name of the station broadcasting, the
name of the program, or the type of program will be shown on the multifunction display. It can only function if the local broadcasting stations
have the RDS transmission and the signal is strong enough.
6
ZONE
STEREO
ON/OFF SEL DISPLAY
DIRECT
SPK
MENU
SET
ENTER
OSD
DVD BD DOCK
MULTI
SAT/CBL CD
MEDIA
FM HDMI
BT
DTS/ AUDIO
SURR.
DOLBY IN
+
+
TONE
STATION VOL
CH SEL -
-
|<< >>|
SUB
STEREO ST/MONO
ON/OFF LFE TRIM
TUNING
MEM PTY
-
+