Connecting To A Network - Denon Professional DN-700AV Guide D'utilisation

Masquer les pouces Voir aussi pour DN-700AV:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Playing Network/Media Server Files
1. If DN-700AV is powered off, press the Power button to power it on.
2. Use the Source Select knob to select Multimedia as the source, select Media Server using the  or 
buttons, then press Enter or ►.
3. Press the  or  buttons to select the server, then press Enter or ►.
4. Use the  or  buttons to find the file, then press Enter or ►.
5. Press the  or  buttons to play the file, then press Enter or ►.
Playback will begin once buffering reaches "100%".

Connecting to a Network

You can play music files stored on a computer or from
Internet radio stations via your network (LAN).
Required equipment:
Broadband Internet connection
Modem
Router: We recommend using a router equipped
with a built-in DHCP server and a built-in 100BASE-
TX switch. When connecting multiple devices, we
recommend a switching hub with a speed of 100
Mbps or greater.
Ethernet cable (CAT-5 or greater recommended):
Use only a shielded STP or ScTP LAN cable.
If you are using an Internet service on which
network settings are made manually or with no
DHCP function, adjust the settings directly from the
Network Setup menu. When adjusting settings
manually, confirm the settings with your network
administrator.
Do not connect the Ethernet cable from DN-700AV
directly to the LAN port/Ethernet connector on your
computer.
1. Connect your Ethernet cable from DN-700AV to
your network.
2. Turn
on
DN-700AV.
automatically on networks with DHCP.
When connecting to a network that has no DHCP
function, manually adjust the settings in the Network Connect menu.
Using a Euroblock Connector (see the side graphic):
1. Twist the speaker wire to form a tight strand and
insert this into the appropriate port, pushing the wire
until it is secured inside.
2. Attach the Euroblock connector to the input terminal
on DN-700AV.
3. To disconnect a wire, use a small screwdriver to
press in the spring above the insert port while
pulling out the wire.
10
DN-700AV
will
connect

Publicité

Table des Matières
loading

Table des Matières