Safety; Intended Use; Safety Information; Ce Designation - Stiebel Eltron HTT 4 Utilisation Et Installation

OPERATION

SAFETY

2. Safety
2.1

Intended use

The appliance is used to dry wet hands.
Any other use beyond that described shall be deemed inappropriate.
Observation of these instructions is also part of the correct use of
this appliance. Any modifications or conversions to the appliance
void all warranty rights.
2.2

Safety information

Risk of burning!
During operation, temperatures in excess of 90 °C
occur at the hot air outlet.
Risk of burning!
Where children or persons with limited physical,
sensory or mental capabilities are to be allowed to
control this appliance, ensure that this will only happen
under supervision or after appropriate instructions by
a person responsible for their safety.
Children must be supervised to ensure that they never
play with the appliance.
Fire hazard!
Never place any objects on top of the appliance.
Never lean any objects against it or place any objects
between the appliance and the wall.
Never place any flammable, combustible or
insulating objects or materials, such as laundry,
blankets, magazines, containers with floor polish or
napsan, spray cans or similar, in direct proximity of
the appliance.
Fire hazard!
Never operate this appliance ...
... in rooms where the appliance is at risk from fire
or explosion as a result of chemicals, dust, gases
or vapours.
... in the direct proximity of pipes or receptacles that
carry or contain flammable or explosive materials.
... if work such as laying cables, grinding or sealing is
carried out in the installation room.
... if sprays, floor polish or similar products containing
napsan are used. Ensure the room is adequately
ventilated before using the appliance.
Danger of electrocution!
Never insert any objects into any aperture in the
appliance. This can lead to fatal electric shocks
and / or fires.
WWW.STIEBEL-ELTRON.COM
Never cover!
Never cover the appliance to prevent overheating.
Note!
Never operate the appliance if the minimum clearances
to adjacent surfaces are not maintained.
Note!
If you use the appliance in workshops or other rooms
where flue gases, oil and petrol vapours, etc. are
present, or solvents and chemicals are used, lasting,
unpleasant odours and possibly contamination
can result.
Note!
Ensure that the air inlet aperture at the bottom and
back of the appliance is always open.
Note!
Maintain the minimum clearance (see chapter
Specification) to the air outlet grille at the bottom.
The hot air must be able to escape unimpeded.
Note!
Never spray the appliance with a water hose to clean
it (see chapter Cleaning, care and maintenance).
2.3

CE designation

The CE designation shows that the appliance meets all essential
requirements according to the:
— Electromagnetic Compatibility Directive
— Low Voltage Directive
2.4

Test symbols

See type plate.
HTT 4-5 | 13