Internal Filter - Beko GNE60520X Manuel D'utilisation

Installation
After the connection is established, it should look
like the figure below.
Water line:
Carboy line:

3.9.2. Internal filter

The internal filter provided with the product is
not installed upon delivery; please follow the
instructions below to install the filter.
1. "Ice Off " indicator must be active while
installing the filter. Switch the ON-OFF
indicator using the "Ice" button on the screen.
2. Remove the water filter by-pass cover by
pulling.
C
A few drops of water may flow out after
removing the cover; this is normal.
3. Place the water filter cover into the
mechanism and push to lock in place.
12 / 31 EN
Refrigerator / User Manual