Dometic COOLMATIC MDC 065 Notice D'utilisation page 14

Setting up and connecting the cooling device
7.5 Connecting the cooling device
For the electrical connection you also need the wiring diagram (fig. 6, page 5).
Cable colours:
No. in
fig. 6,
Meaning
page 5
sw black
rt red
Connecting to a battery
The cooling device can be operated with a 12 V or 24 V DC voltage supply.
A
NOTICE!
To avoid voltage loss and therefore a drop in performance, the cable
should be kept as short as possible and should not be interrupted if this
is possible.
For this reason avoid additional switches, plugs or power strips.
➤ Determine the required cross section of the cable in relation to the cable length
according to fig. 7, page 6.
Key for fig. 7, page 6
Co-ordinate axis
l
∅
A
NOTICE!
Make sure that the polarity is correct.
• Before starting up the device for the first time, check whether the operating
voltage and the battery voltage correspond (see type plate).
14
Meaning
Cable length
Cable cross section
MDC
Unit
m
mm²
EN