Measuring Station; Base Station - Hama EWS-152 Mode D'emploi

4. Getting Started

4.1 Measuring station

• Open the battery compartment (13) and insert two AAA batteries with the correct
polarity. Close the battery compartment.
Note
Before use, ensure you insert the batteries in the measuring station rst and then in the

base station.

4.2 Base station
• Open the battery compartment (10) and insert two AAA batteries with the correct
polarity. Close the battery compartment.
5. Installation
Note – Installation
• We recommend initially placing the base and measuring stations in the intended
locations without installing them and making all the settings described in 6.
Operating – to do
• Only install the stations once the appropriate settings have been made and a stable
wireless connection is established between the stations.
• Do not mount the product above locations where persons might linger.
Note
• The wireless transmission range between the measuring and base stations is up to
30 m in open spaces.
• Before installation, ensure that wireless transmission will not be disrupted by
interference or obstacles like buildings, trees, vehicles, high-voltage lines, etc.
• Before the nal installation, ensure that there is su cient reception between the
intended installation locations.
• When installing the measuring station, ensure that it is protected from direct sunlight
and rain.
• The international standard height for measuring air temperature is 1.25 m (4 ft)
above ground.
4